Original German WWII M42 Wehrmacht Bunker Camo Concrete Textured Paint Helmet with Liner – Size 64 Shell Original Items

Original Item: Only One Available. This is an excellent all original example of a late war German Model 42 Steel helmet painted with concrete textured bunker paint.

This helmet most likely was originally worn by a German soldier assigned to a German fortification bunker due to the fact that the helmet was quite obviously painted with a thick layer of Deep Green Paint with concrete mixed in, the type and shade of such paint is indicative of the green paint used within the interiors of German bunkers. Once the soldiers painted the concrete interiors it was common practice for them to also paint their helmets as well. As the brushes, and cans of paint, would have had remnants of concrete in them from previously painting the concrete walls, the paint made for a decent ad hoc textured layer of camouflage!

As the inside of the flared edges are covered in thick paint, unfortunately we cannot read the makers stamp or the size, though we’re certain however that a collector’s concern in the 21st century not would have been a German soldier’s concern in the 1940s! Measuring the exterior with a tape indicates that it is probably a size 64cm shell.

The M-1942 Pattern helmet is a further simplification of the M-1935/M-1940 Pattern Stahlhelm. This helmet is for the Wehrmacht, the general term for the German armed forces, as it does not have any decals to identify any particular unit. More than likely near the end of the war, making sure a decal was present was not considered overly important. This is a very nice example of the M42 helmet.

All three original liner retaining pins are intact The interior of the helmet still has the original M31 leather liner with all eight of its fingers in good condition. The leather has gotten stiff over time, and the original tie strap is missing.

Overall a very nice late-war German M42 Wehrmacht “No decal” helmet! M42 helmets of this quality are always the hardest to find on the market. This is an item that will only continue to appreciate in value over time.

The first “modern” steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (“Gaede” helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet’s shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet’s safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army’s Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.

The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.