Original German WWII M42 Single Decal Luftwaffe Helmet with Textured Paint – ET64 Original Items

Original Item: Only One Available. This is an very nice all original example Model 1942 German WWII helmet with a single Luftwaffe Eagle decal. This stamped sheet steel construction helmet retains over 80% of the original blue/grey lightly textured Luftwaffe paint, and is in very good condition overall. There is definitely wear, but nothing out of line with standard wear that would happen during wartime service. The decal is retained at about 90%, with a few small chips that go down through the paint. This is definitely a nice example of this type of helmet.

On the reverse of the shell’s interior, the neck guard apron is lot number stamped 1818 and has a stamped manufacturer’s code over the left ear and size, ET64 indicating it was manufactured by Eisenhuttenwerk AG, Thale Harz. Size 64 is a nice medium size that can usually accommodate liners from 56cm to 57cm or US 7 to 7 1/8.

All three original liner retaining pins are intact and have most of the original paint on the ends. The interior of the helmet still has an original good M31 leather liner with all eight fingers, with the original securing string. The leather is quite soft, with a bit of tearing around the rim. The side of the galvanized steel liner band is marked 62 n.A. / 54, indicating that this is a size 54 liner for a size 62 shell. The other side has the manufacturer and date in a circle:

SCHUBERTH – WERK K.G
D. R. P.
1940
BRAUNSCHWEIG

We are not sure why this helmet was fitted with a smaller liner than it was designed for, but the split pins do not look to have been moved anytime recently. Most likely towards the end of the war, if there was no suitable shell or liner present, they needed to make due with what they had on hand to get a soldier a helmet that had a liner that fit. The helmet also has a complete original chin strap, which is in very good condition, with the expected wear from age.

Overall a very nice condition genuine M42 Single Decal Luftwaffe helmet! This is an item that will only continue to appreciate in value over time.

The first “modern” steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (“Gaede” helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet’s shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet’s safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army’s Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.

The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.