Original German WWII M42 Single Decal Army Heer Helmet Shell with Partial Liner – NS64 Original Items

Original Item: Only One Available. This is a very nice all original service worn example of a German Model 42 Steel helmet shell with a partial liner, as issued to the Wehrmacht Heer (army). This stamped sheet steel construction helmet retains over 75% of its original paint, with overall wear consistent with long use in service. There are areas of paint loss and corrosion. The left side of the helmet features a very nice Heer eagle decal. The decal is retained about 75%, with some areas chipped out with the paint, however the silver color is still very vibrant. This is a shell with a great service worn look to it.

The reverse, interior, neck guard apron is lot number stamped 3776 and the interior, left side, apron has the stamped manufacturer’s code and size NS64, indicating that it was manufactured by Vereinigte Deutsche Nikelwerke, of Schwerte, Germany. Size 64 is a nice medium size that can accommodate liners from 56cm to 57cm or US 7 to 7 1/8. Size 64 shells are harder to find and are therefore more valuable to a collector. There is also a faint dome stamp on the inside of the shell, but it cannot be read accurately.

All three liner retaining pins are intact, with most of the original paint intact. The interior of the helmet still has the original M31 leather liner band with padding, however the leather portion is almost completely missing. The late war issue galvanized steel liner band is marked on the left outer side with 64 nA / 56, indicating that the liner banc is a size 56, intended for a 64 shell. The other side of the band has the full manufacture marking and date:

B. & C.
LITZMANNSTADT
1943

This liner was made by Biedermann & Czarnikow, a German company who moved operations to Łódź in occupied Poland to take advantage of the slave labor in the ghetto located there. NSDAP authorities renamed Łódź to Litzmannstadt in honor of the German General Karl Litzmann who had captured the city in the previous World War.

The chin strap is unfortunately completely missing, most likely rotted away with the leather from the liner

Overall an very nice Service Worn M42 Single Decal Heer Army helmet shell, with loads of patina! This is an item that will only continue to appreciate in value over time.

The first “modern” steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (“Gaede” helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet’s shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet’s safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army’s Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.

The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.