Original German WWII Army Heer M40 Service Worn Single Decal Steel Helmet with Textured Paint – Q64 Original Items

Original Item: Only One Available. This is a very nice all original service worn example of a German WWII M40 helmet, issued to the Heer (Army). This stamped sheet steel construction helmet retains much of its original lightly textured field gray paint but does show paint loss and other wear, typical of a helmet that was used in the field. There is some paint loss around the rim, and overall oxidation speckling inside and out. The left side of the helmet features a Heer eagle decal, which is retained about 75%, with damage from wear and use. Loads of history and a lovely patina on this helmet!

The reverse, interior, neck guard apron is serial number stamped TN80 and the interior, left side, apron has the stamped manufacturer’s code and size, Q64 indicating that it was manufactured by Quist in the German city of Esslingen. Size 64 is a nice smaller size that can accommodate liners from 56cm to 57cm or US 7 to 7 1/8. Size 64 shells are harder to find and are therefore more valuable to a collector.

All three original liner retaining pins are intact and have most of the original paint on the tops. The interior of the helmet still has part of an original leather liner, however the leather portion is somewhat deteriorated. There is overall wear and cracking, and several of the fingers are missing, while others are not far off, though the top tie is still present and intact. The outer side of the mid war galvanize steel liner band over the left ear is marked 64 n.A / 56, indicating that this is a size 56 liner for a size 64 shell. Unfortunately due to oxidation, the make mark on the other side is no longer legible. The chin strap is unfortunately completely missing.

Overall a very nice 100% genuine M40 Single Decal Heer Army helmet, with a great service worn look! M40 helmets of this quality are always the hard to find on the market. This is an item that will only continue to appreciate in value over time.

The first “modern” steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (“Gaede” helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet’s shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet’s safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army’s Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

More than 1 million M1935 helmets were manufactured in the first two years after its introduction, and millions more were produced until 1940 when the basic design and production methods were changed, replacing the multi-piece riveted vent with one stamped directly into the steel. Later, in 1942 the rolled steel rim was removed from the pattern to further expedite production.