Original German WWII Army Heer M40 No Decal Steel Helmet with Textured Overpaint & 55cm Liner – Q62 Original Items

Original Item: Only One Available. This is a very nice all original example of a German WWII M40 helmet, issued to the Heer (Army). This stamped sheet steel construction helmet looks to have been in service for some time, and had the shell field repainted at some point, covering the original paint with a nice textured camouflage. This could involve aluminum oxide, sand, or some other material. The original paint could get worn shiny after a while, which was definitely not desirable in the field, so helmets were constantly being repainted.

Almost all of the textured repaint is present, with the expected wear and chipping due to age. There is a bit of dirt and some moderate oxidation, giving it a great patina that cannot be duplicated!

The reverse, interior, neck guard apron is batch number stamped N380, under the stamped manufacturer’s code and size, Q62. This indicates it was manufactured it was manufactured by F.W. Quist G.m.b.H. in the German city of Esslingen. Size 62 is a nice smaller size that can accommodate liners from 54cm to 55cm or US 6 3/4 to 6 5/8.

All three liner retaining pins are intact, and still have most of the original textured paint still present. The interior of the helmet still has the original M31 leather liner with 7 fingers, only seen on these very small liners. 6 of 7 are intact, with one having had a leather piece glued on the back post war to reassemble it. There is a replacement top tie threaded through all of the fingers. The side of the galvanized steel liner band is marked 62 n.A. / 55, indicating that this is a size 55 liner for a size 62 shell. The right side displays manufacturing information, as well as a date, which is partly clear. What we can read looks to be:

RBNr. 0/0471/0046
D.R.P.
1943

The chinstrap is unfortunately completely missing.

Overall a very nice 100% genuine M40 Heer Army helmet, with a great textured camouflage overpaint and a great service worn look! M40 helmets of this quality are always the hard to find on the market. This is an item that will only continue to appreciate in value over time.

The first “modern” steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, (“Gaede” helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet’s shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet’s safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army’s Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

More than 1 million M1935 helmets were manufactured in the first two years after its introduction, and millions more were produced until 1940 when the basic design and production methods were changed, replacing the multi-piece riveted vent with one stamped directly into the steel. Later, in 1942 the rolled steel rim was removed from the pattern to further expedite production.